Prodám digitální Clamp-like multimetr neznačkové značky typ DT3266L

Jde o dárek, který nevyužiju, protože už avomet mám. Je nový, jen jsem ho rozbalil a vložil baterie pro vyzkoušení.

Paragon nemám, můžu dát záruku jen na vyzkoušení. Přiložený návod je v angličtině. Obrázky jsou ilustrační.

Funkce a měření:

Display: 3.5 digital LCD with a MAX reading of 1999, Auto polarity display
Measure method: double integral A/D switch implement
Sampling speed: 2 times per second
Over-load indication: "1" is displayed
operating Environment: 0℃~40℃,at<80%RH
Storage Environment: -10℃~50℃,at<85%RH
 Power: 2 size AAA batteries 
Low battery indication: support
Static electricity: about 4mA
Clamp dimension: 25mm for open jaw; 35mm for inner diameter

Technical specifications:
The accuracy Below is within one year after its test when leaving factory, and the temperature range is 23℃±5℃,at<75% relative humidity.

AC Current:
Range AC20A Resolution 10mA Accuracy ±(2.5%+10d)
Range AC200A Resolution 100MA Accuracy ±(2.5%+10d)
Range AC600A Resolution 1A Accuracy ±(2.5%+10d)
Note: test lead under measure should be put uprightly in the center of clamp sensor, or accuracy will be affected.

DC&AC Voltage:
Range DC600v Resolution 1V Accuracy ±(1.0%+3d)
Range AC600v Resolution 1V Accuracy ±(1.2%+5d)
Input Impedance: ≥10MΩ

Resistance
Range 2KΩ Resolution 1Ω Accuracy ±(1.0%+4d)
Range 200KΩ Resolution 100Ω Accuracy ±(1.0%+4d)
Range 2MΩ Resolution 1KΩ Accuracy ±(1.0%+4d)
Overload Protection: 250V DC/AC virtual value

Phase Indication (50Hz)
Range: AC380V±10%, Phase indication: OK/Reversal/MISS, Accuracy ±3%

Live Wire Test
Range: 180V~400V, Live wire detect: LIGHT or LCD indication

Color: black with yellow
Dimension: 167*55*22mm
Net weight: 135g (including battery)
 

Přeji příjemnou aukci